|
|
Improvement of manufacturing technology of flange
Dvořák, Jakub ; Fiala, Zdeněk (referee) ; Jaroš, Aleš (advisor)
This diploma thesis focuses on improvement of the existing technology of the flange part in cooperation with the company Znojemské strojírny, s r.o. The theoretical part describes the technologies used in machining of the component. Subsequently, cutting materials and aluminum alloys are dealt with. A detailed analysis of the existing technology is performed in the practical part of the thesis followed by rationalization of the production process, which was carried out with respect to time and financial savings. A new technological procedure is developed after the improvement of the current production process. Finally, a technical-economic evaluation of the design improvement process is carried out.
|
|
|
Design of a portable machine for machining large diameter pipes
Boháč, Josef ; Pavlík, Jan (referee) ; Tůma, Jiří (advisor)
This diploma thesis deals with the design of a portable machine for machining large diameter pipes. This thesis is divided into research, calculation, design, and construction parts. The introductory part is devoted to research in the field of joining large diameter pipes, with a focus on flanged and welded joints. Based on the findings from the research part, several construction solutions were considered. In the next part, the most suitable design solution was selected using a multicriteria analysis technique and subsequently elaborated on in detail. The following chapter deals with the calculation of maximal cutting forces and the selection of motor. An air motor was chosen as the most suitable option for the proposed machine. This part is followed by the computational part, which includes strength calculations for the critical parts of the machine. The final part of the thesis is devoted to the construction itself and the description of the individual construction nodes of the machine. The thesis also includes a 3D model, drawings of selected parts, and an assembly drawing.
|
|
|
Design of heat exchanger after ČSN EN 13 445
Lošák, Pavel ; Vincour, Dušan (referee) ; Vincour, Dušan (referee) ; Nekvasil, Richard (advisor)
Diploma thesis is fucused on strength calculation of the heat exchanger according to ČSN EN 13 445. Introductory part introduce problems with the design of heat exchangers. In other parts there are a strength calculation of the heat exchanger according to ČSN EN 13 445, the results of the analysis with their appreciation. Annexes included output logs from the program Sant 'Ambrogio, and drawings documentation.
|
|
|
The manufacturing of a flange by fineblanking technology
Povalač, Tomáš ; Šlais, Miroslav (referee) ; Peterková, Eva (advisor)
Aim of the project is to design new flange manufacturing technology. The flange is manufactured from stainless sheet 17 040 with 5 mm thickness and annual production batch of 800 000 pieces. Fineblanking process has been proposed as a new production technology. Technological and construction dimensions have been designed for the proposed technology. The fineblanking process is done by automated machine which consist of unwinding and straightening device, mechanical punch press and winding device. The manufactured part is punch pressed by tool which is located in the punch press in one lift. An economic evaluation compares current manufacturing technology with the proposed technology which is more economically convenient.
|
|
|
Analysis of forging disagreement
Novotný, Karel ; Hoza, Jiří (referee) ; Fiala, Alois (advisor)
This diploma thesis deals with the generation of the different drope stampings in industrial process in MBNS Kovárna Company. The main purpose of this thesis is analysis of the industrial process and finding the main factors influences on the process. It especially deals with forgings of the shafts and also flanges with the similar quality of material 42CrMo4. Reasons of the disagreements are focused on surface insensibilities of the forging - crack. First theoretic part introduces company, meaning of the quality of material and describes tools used for finding reasons of the generation of disagreements. In the second practical part is described the whole industrial process and determination of the reasons of disagreements. In concluding part the results are analyzed and some correctional recommendations are suggested.
|
|
|
Design of column
Marko, Libor ; Buzík, Jiří (referee) ; Nováček, Filip (advisor)
The thesis contains information about the design of pressure vessels and describes their individual parts. It is mentioned production of individual parts and the process including assembly parts in one unit. The thesis includes options of control and testing of pressure vessels. It is described kinds of built-ins of distillation column and the basic principles and types of distillation. It is created stress analysis of pressure vessels parts according to ČSN EN 13 445 – 3, and also stress analysis of the selected part of column by using FEM. Mechanical drawing of distillation column is part of the thesis.
|
|
|
Safe-life extension program for ZLIN Z 126 and 226 airplanes
Jančář, Milan ; Juračka, Jaroslav (referee) ; Augustin, Petr (advisor)
This master's thesis discusses the possibilities of safe-life extension program for ZLIN Z 126 and 226 airplanes, which despite their age and long-end production are still widespread and popular not only in the Czech Republic. The age of these aircraft is also related to the fact, that some aircraft are already approaching its border life, so there is an interest for the longest possible technical and legislative airworthiness. As mentioned in my bachelor's thesis, during the existence of this model series, there was no major damage occurred, except for sporadic exfoliation corrosion of wing flanges. Experience with maintenance of this aircraft points to certain underestimation of the current 5500hrs lifetime and it is obvious to suggest possible steps to increase the current limit. The thesis is therefore considered in this context the possibility of producing new wing flanges made of another material, performed the calculation for wing fatigue exchanged with flanges and designed technological process of this exchange, so that ZLIN Z 126 and 226 airplanes can be safely operated in the future.
|
|
|
Drop forging of flange
Bednář, Jaroslav ; Řiháček, Jan (referee) ; Štroner, Marek (advisor)
The aim of the project developed within the framework of the Bachelor's degree in Institute of Manufacturing Technology is the design of the production of a flange forging by die forging from alloy structural steel 14 220 (1. 7131). Size of production is set on 100 000 pieces per year. Based on calculations, the LMZ 4000 vertical forging press with a forming force of 40 MN is selected for production. Three production operations are selected for a given production. Forging dies are designed using an ejector. The material of the dies is alloy instrumental steel 19 552.8 (1. 2343). At the end of the project, a technical and economic evaluation is carried out where a price comparison and costs for the production of die forging and machining are given.
|
|
|
Optimalization of machining processes in production of CP4 flanges
Švaříček, Petr ; Prokop, Jaroslav (referee) ; Humár, Anton (advisor)
The main objective of the bachelor thesis is to review actual status of tooling process of flange CP4 made by aluminum alloy for high pressure pump of system Common Rail in certain conditions of Bosch Diesel, s.r.o. in Jihlava. Special attention is drawn to consideration of production requirements and quality level maintenance. The thesis aims to propose a new technology of tooling and to review its effectiveness.
|
|
|
Turning technology solution parts "flange" with coated cutting tools
Maršálek, Radek ; Dvořák, Jaromír (referee) ; Kalivoda, Milan (advisor)
This work deals with the use of coated tools in the production of component "flange" on the CNC lathe. The first section describes the process of the coating of tools and an overview of coating tools for machining from well-known manufacturers around the world. Further, it provides the assessment of technology for manufacture the components, the design of semiproduct, the solution of the technological process with the incorporation of the CNC lathe, the assembly of work instructions with calculation of machinery times, and the processing of the NC program and its subsequent verification by simulation of manufacturing process and technical-economic evaluation of the proposed solution.
|
guest ::
